Lyophilization comes up often in conversation and rarely with the context attached. Here we lay out the basics in order, then work through the practical considerations.
Last reviewed on 2025-08-15. Where a claim depends on a specific study, the study is described rather than over-claimed.
The peptide occurs naturally in thymic tissue and has been detected in serum and other biological fluids. Reported concentrations are low, and reliable measurement generally requires immunoassay or mass spectrometry with an enrichment step. It is released from a larger precursor, prothymosin alpha, by proteolytic cleavage, although the enzymes involved are not fully characterized. Whether circulating levels reflect thymic output specifically remains an open question.
Thymosin alpha 1 is a 28-amino-acid peptide first isolated from thymosin fraction 5, a bovine thymic extract. Its sequence begins with an acetylated serine residue and carries a high proportion of acidic residues, so the molecule has a net negative charge near neutral pH. Despite the shared name, it is unrelated in sequence to the thymosin beta family. Synthetic material prepared by solid-phase peptide synthesis is identical in sequence to the natural peptide.
Several names appear in the literature for this peptide, including thymalfasin and the abbreviation T-alpha-1. Naming conventions differ among research articles, regulatory documents, and supplier catalogs, which complicates literature searches. Both synthetic and recombinant production routes yield a peptide with the same 28-residue sequence as the thymic isolate. Because the thymosin label also covers unrelated peptides, sources should be compared by sequence rather than by name alone.
Long-term storage is generally at minus twenty degrees Celsius or colder, preferably desiccated and protected from light. Lyophilized material is more stable than reconstituted solution, which degrades faster at room temperature. Stability depends on pH, ionic strength, and the presence of oxidising agents. Published stability data for the peptide are limited, so storage claims in catalogues should be treated as general guidance rather than measured guarantees. Freeze-thaw cycles are kept to a minimum.
Identity and purity are normally confirmed by reversed-phase high-performance liquid chromatography and mass spectrometry. The expected mass for the acetylated 28-residue peptide is close to 3108 daltons, and a mass shift indicates a modification or truncation. Peptide mapping after enzymatic digestion can resolve sequence-level questions. Counter-ion content, water content, and residual solvents are separate quality attributes that a certificate of analysis may or may not report. Aggregation is monitored by size-exclusion chromatography when relevant.
Thymosin alpha-1 is supplied as a lyophilized powder in most research settings. The solid dissolves readily in water and in common aqueous buffers, and it is typically reconstituted shortly before use. Solutions are clear and colourless at ordinary working concentrations. Because the peptide is hygroscopic, weighing and reconstitution are usually performed with minimal exposure to ambient air. Aliquots are prepared to avoid repeated freeze-thaw cycles, and working solutions are kept cold.
| Property | Value | Notes |
|---|---|---|
| Molecular formula | C129H215N33O55 | Calculated for the acetylated 28-residue peptide |
| Appearance | White to off-white powder | Lyophilized solid recovered from aqueous buffer |
| Solubility | Freely soluble in water | Typically dissolved in water or buffer before use |
| Typical storage | -20 C or below, desiccated | Protect from light and avoid repeated freeze-thaw cycles |
| Identity testing | Reverse-phase HPLC with mass spectrometry | Retention time and measured mass confirm the sequence |
Lyophilized material is generally held at reduced temperature to slow degradation, and storage at minus twenty degrees Celsius or lower is common practice for long-term retention. Short-term working portions are often kept between two and eight degrees Celsius. Once dissolved, the peptide is less stable than the dry powder, and repeated freeze-thaw cycles are associated with loss of material and with aggregate formation. Vials are usually allowed to reach room temperature before opening so that condensation does not introduce moisture, and solutions are protected from light where practical.
Identity and purity are assessed mainly by reversed-phase high-performance liquid chromatography, which separates the peptide from closely related impurities and from truncated or oxidized variants. Mass spectrometry supplies the molecular mass and confirms the expected sequence length, while amino acid analysis can be used to check composition. Because the molecule has no chromophore beyond the peptide backbone, ultraviolet detection is typically performed at a low wavelength, where baseline interference from solvents and buffers is a practical concern. Water content and counter-ion content are often reported alongside purity.
Lyophilized thymosin alpha 1 is typically stored refrigerated at 2 to 8 degrees Celsius and kept away from light. Reconstituted solutions are less stable and are usually used promptly after preparation. Repeated freeze-thaw cycles are avoided because they can promote aggregation and loss of activity. The peptide adsorbs to some plastic and glass surfaces, so a carrier protein is often added to dilute working solutions. Manufacturer instructions and published protocols both govern handling.
Identity and purity testing for thymosin alpha 1 relies mainly on reversed-phase high-performance liquid chromatography and mass spectrometry. Chromatography separates the parent peptide from truncated or modified variants, while mass spectrometry confirms the expected molecular mass. Amino acid analysis and peptide mapping provide additional sequence confirmation. Counterion content, water content, and residual solvents are measured separately as part of specification testing. No single method captures every attribute, so laboratories combine several techniques.
The peptide lacks cysteine, methionine, and tryptophan, so disulfide scrambling and sulfur oxidation are not major degradation routes. Instead, aspartate residues can undergo isomerization or cyclization to succinimide intermediates, generating isoaspartate variants. Hydrolysis of peptide bonds also occurs slowly in solution. These changes may reduce biological activity even when the main peak remains detectable. Stability studies therefore track both potency and the appearance of related substances.
The lyophilized peptide is a white to off-white powder that dissolves freely in water and in aqueous buffers near neutral pH. Because the molecule carries a net negative charge under physiological conditions, saline and phosphate solutions are the usual vehicles, while strongly acidic media are avoided. Stock solutions are commonly divided into small aliquots so that repeated freezing and thawing can be limited, since cycling may encourage aggregation. Solubility in organic solvents is poor and those solvents are seldom used as primary diluents.
Recommended storage for the dry powder is a freezer near minus twenty degrees Celsius, kept desiccated and away from light. Once dissolved, the peptide is less stable and is usually held at two to eight degrees Celsius for short intervals or frozen for longer storage. Stability studies focus on the acetylated terminus and the disulfide linkage because those features define the intact molecule. Common degradation routes include cysteine oxidation, deamidation of asparagine or glutamine side chains, and slow formation of higher-molecular-weight species.
Thymosin alpha-1 is a short peptide of 28 amino acid residues first described in the 1970s as a component of thymic extracts. Its N-terminal residue carries an acetyl group, and the sequence is highly conserved across mammalian species. The peptide is not encoded as a standalone gene product; it is released by proteolytic cleavage from the N-terminus of prothymosin alpha, a larger acidic nuclear protein. That precursor relationship places it within a broader family of thymic and immune-associated peptides that have been studied for decades.
The activity of this peptide is generally described as immunomodulatory rather than directly antimicrobial. Experimental work links it to signaling through certain Toll-like receptors on dendritic cells and to downstream maturation of antigen-presenting cells. Reported effects include expansion of T cell subsets, shifts in cytokine profiles, and increased natural killer cell activity. These observations come largely from cell culture and animal models, and the precise receptor-level events in humans remain incompletely characterized.
== External links == "Huffingtonpost Israel-Wolf-Prizes 2012". Huffington Post. 10 January 2012. "Jerusalempost Israel-Wolf-Prizes 2013". December 2010. "Jerusalempost Israel-Wolf-Prizes 2014". 16 January 2014. Jerusalempost Israel-Wolf-Prizes 2016 Jerusalempost Israel-Wolf-Prizes 2017 Jerusalempost Wolf-Prizes 2018 Wolf Prize 2019
Octopuses have two sexes and have only one gonad (testis in males and ovary in females) located posteriorly. The gonad deposits gametes into an adjacent cavity called the gonocoel. A gonoduct bridges the gonocoel with the mantle cavity. An optic gland creates hormones that cause the octopus to mature and age and stimulate gamete production. The timing of reproduction and lifespan depends on environmental conditions such as temperature, light and nutrition, which trigger the gland. The male has a specialised arm called a hectocotylus which it uses to transfer spermatophores (packets of sperm) into the female's mantle cavity. The hectocotylus in Octopus is usually the R3 arm, which has a spoon-shaped depression and a suckerless tip. Fertilisation may occur in the mantle cavity or in the surrounding water. Reproduction has been studied in some species. In the giant Pacific octopus, courtship includes changes in skin texture and colour, mostly in the male. The male may cling to the top or side of the female or position himself beside her. There is some speculation that he may first use his hectocotylus to remove any spermatophore or sperm already present in the female. He picks up a spermatophore from his spermatophoric sac with the hectocotylus, inserts it into the female's mantle cavity, and deposits it in the correct location in the opening of the oviduct. Two spermatophores are transferred in this way; these are about one metre (yard) long, and the empty ends may protrude from the female's mantle. A complex hydraulic mechanism releases the sperm from the spermatophore.
== Production == Cyanocobalamin is commercially prepared by bacterial fermentation. Fermentation by a variety of microorganisms yields a mixture of methylcobalamin, hydroxocobalamin and adenosylcobalamin. These compounds are converted to cyanocobalamin by addition of potassium cyanide in the presence of sodium nitrite and heat. Since multiple species of Propionibacterium produce no exotoxins or endotoxins and have been granted GRAS status (generally regarded as safe) by the United States Food and Drug Administration, they are the preferred bacterial fermentation organisms for vitamin B12 production. Historically, the physiological form was initially thought to be cyanocobalamin. This was because hydroxocobalamin produced by bacteria was changed to cyanocobalamin during purification in activated charcoal columns after separation from the bacterial cultures (because cyanide is naturally present in activated charcoal). Cyanocobalamin is the form in most pharmaceutical preparations because adding cyanide stabilizes the molecule. The total world production of vitamin B12, by four companies (the French Sanofi-Aventis and three Chinese companies) in 2008 was 35 tonnes.
Hooters, Inc., was incorporated in Clearwater, Florida, on April 1, 1983, by six Clearwater businessmen: Lynn D. Stewart, Gil DiGiannantonio, Ed Droste, Billy Ranieri, Ken Wimmer and Dennis Johnson. The date was an April Fools' Day joke because the original six owners believed that their prospect was going to fail. Their first Hooters restaurant was built on the site of a former rundown nightclub that had been purchased at a low price. So many businesses had folded in that particular location that the Hooters founders built a small "graveyard" at the front door for each that had come and gone before them. The first restaurant opened its doors on October 4, 1983, in Clearwater. This original location was decorated with memorabilia from Waverly, Iowa, hometown to some of the original Hooters 6. In December 1984, Hugh Connerty bought the rights to Hooters from the Original Hooters 6. Robert H. Brooks and a group of Atlanta investors (operators of Hooters of America, Inc.) bought out Hugh Connerty. In 2002, Brooks bought majority control and became chairman. The Clearwater-based company retained control over restaurants in the Tampa Bay Area, Chicago metropolitan area, and one in Manhattan, as well as rights to develop a Hooters casino and sell sauces in grocery stores, while all other locations were under the aegis of Hooters of America, which sold franchising rights to the rest of the United States and international locations. Under Brooks's leadership, the collective Hooters brand expanded to more than 425 stores worldwide.
Sources: en.wikipedia.org
Adesuwa Obasuyi (born February 1990) is a Nigerian environmentalist, climate change advocate, and the initiator of Sustainable Africa Cities and Communities Initiative - an environmental non-governmental organization that focuses on waste, and waste data management in Nigeria and Africa. She currently works as the Climate Change Policy Manager at the British High Commission, Abuja. She attended Delta State University, and obtained a bachelor's degree in Biochemistry in 2010; she went further to get a master's degree in Environmental Quality Management(2014 - 2017) from the University of Benin.
The use of a solvent gradient is very well developed in column chromatography but is less common in CCC. A solvent gradient is produced by increasing (or decreasing) the polarity of the mobile phase during the separation to achieve optimal resolution across a wider range of polarities. For example, a methanol-water mobile phase gradient may be employed using heptane as the stationary phase. This is not possible with all biphasic solvent systems, due to excessive loss of stationary phase created by disruption the equilibrium conditions within the column. Gradients may either be produced in steps, or continuously. In dual-mode, the mobile and stationary phases are reversed part way through the separation experiment. This requires changing the phase being pumped through the column as well as the direction of flow. Dual-mode operation is likely to elute the entire sample from the column but the order of elution is disrupted by switching the phase and direction of flow.
Oligonucleotides are chemically synthesized using building blocks called nucleoside phosphoramidites. These can be normal or modified nucleosides which have protecting groups to prevent their amines, hydroxyl groups and phosphate groups from interacting incorrectly. One phosphoramidite is added at a time, the 5' hydroxyl group is deprotected and a new base is added and so on. The chain grows in the 3' to 5' direction, which is backwards relative to biosynthesis. At the end, all the protecting groups are removed. Nevertheless, being a chemical process, several incorrect interactions occur leading to some defective products. The longer the oligonucleotide sequence that is being synthesized, the more defects there are, thus this process is only practical for producing short sequences of nucleotides. The current practical limit is about 200 bp (base pairs) for an oligonucleotide with sufficient quality to be used directly for a biological application. HPLC can be used to isolate products with the proper sequence. Meanwhile, a large number of oligos can be synthesized in parallel on gene chips. For optimal performance in subsequent gene synthesis procedures they should be prepared individually and in larger scales.
Sources: en.wikipedia.org
Later Ghanaian fashion includes traditional and modern styles and fabrics and has made its way into the African and global fashion scene. The cloth known as African print fabric was created out of Dutch wax textiles. It is believed that in the 19th century, Dutch ships on their way to Asia stocked with machine-made textiles that mimicked Indonesian batik stopped at West African ports on the way. In West Africa—mainly Ghana where there was an already established market for cloths and textiles—the client base grew and it was changed to include local and traditional designs, colours and patterns to cater to the taste of the new consumers. Outside of Africa, it is called "Ankara", and has a client base beyond Ghana and Africa as a whole. It is present among Caribbean peoples and African Americans; celebrities such as Solange Knowles and her sister Beyoncé have been seen wearing African print attire. Designers from countries in North America and Europe use African prints. British luxury fashion house Burberry created a collection around Ghanaian styles. Ghanaian-British designer Ozwald Boateng introduced African print suits in his 2012 collection.
== Clinical trials == The drug is currently under development by AbbVie. Navitoclax is used as mono-therapy as well as in combination with chemotherapies (paclitaxel, docetaxel, gemcitabine, and irinotecan), olaparib, erlotinib, venetoclax, and rituximab in advanced hematological malignancies (in both pediatric and adult patients) and solid tumors including ovarian cancer, breast cancer, lung cancer. Additionally, an ongoing global multi-center, randomized, open-label, phase 3 study evaluating efficacy and safety of navitoclax in combination with ruxolitinib versus best available therapy in adult patients with relapsed/refractory myelofibrosis was initiated on 31 August 2020. The study is expected to conclude in 2026.
A bone graft can be created between the two bones using a bone from elsewhere in the person's body (autograft) or using donor bone (allograft) from a bone bank. Bone autograft is generally preferred by surgeons because, as well as eliminating the risks associated with allografts, bone autograft contains native bone-forming cells (osteoblasts), so the graft itself forms new bone (osteoinductive), as well as acting as a matrix or scaffold to new bone growing from the bones being bridged (osteoconductive). The main drawback of bone autograft is the limited supply available for harvest. Bone allograft has the advantage of being available in far larger quantities than autograft; however, during the treatment process the bone goes through following harvest, which usually involves deep-freezing and may also involve demineralization, irradiation and freeze-drying, kills living bone or bone marrow cells. This significantly reduces the immunogenicity (risk of graft rejection) such that no antirejection drugs are needed, and combined with appropriate donor screening practices, these processing and preservation practices can significantly reduce the risk of disease transmission. In spite of all of this processing, cancellous allograft bone retains its osteoconductive properties. Furthermore, certain processing practices have been shown to also retain the acid-stable osteoinductive proteins in cortical bone grafts, so that many bone allografts can be considered both osteoconductive and osteoinductive. A variety of synthetic bone substitutes are commercially available.
Sources: en.wikipedia.org
It is a 28-amino-acid peptide originally purified from a bovine thymic extract and later produced synthetically. It is studied mainly for its effects on immune cell function.
No. The two peptides share part of a name but differ in length, sequence, and net charge. Literature searches that treat them as one compound return misleading results.
Solid-phase peptide synthesis is the usual route, and recombinant expression has also been described. Both approaches produce material matching the natural sequence.
Lyophilized powder is normally kept at minus twenty degrees Celsius or below, in a sealed container, desiccated and away from light. Reconstituted solutions are less stable and are usually refrigerated and used quickly. Repeated temperature cycling should be avoided.